tbd
3D Printing!
Windshield Washer Fluid Reservoir Cap
The cap for the windshield washer fluid on my car broke and was lost due to poor-quality plastic. So, I made a replacement myself.
Standard Galactic Alphabet
A stencil for drawing letters in standard galactic alphabet. Used in Commander Keen or Minecraft. Unfortunately I had no Prusament galaxy black, thus I printed it with white PETG. If you want to have bigger or smaller letters, or wish to change aspect ratio, scale it in the slicer.
Penrose Fan Grill for Prusa MK4
This fan grill brings the spirit of Penrose tiles to your MK4 printer.
Magic
That`s where the magic happens.
Printing with support material
My ‘problem’ is that I only have a printer without color (multi-material) switching. I want to try if I can still print supports (in this case, PVA) by manually swapping out the filament. The idea is that only two layers need to be printed using the support material, so the manual filament change stays manageable. To do this, I use the technique described here. You have to create separate bodies in your CAD tool for each material and assign them to individual extruders in the slicer. After printing, the PVA is dissolved in water, so it’s necessary for the water to reach the PVA layer well. For this, I use organic support structures.
On the right side, the test object is shown—first in Fusion, then in the slicer, and then the result. Place it in an ultrasonic bath with dish soap for half an hour.
This is just a test to see if this can work. Of course, the demonstration object could be printed without supports.
It works fine. Now I'm happy.
3d Overview for Beginners
Cetero oporteat sensibus his eu. Has ex vidisse perpetua, vis partem mollis mandamus at. Ea nam legere mentitum prodesset, no quo lucilius liberavisse, te oratio debitis omittantur eos. Sea ea iusto detracto, ut scripta sapientem suavitate cum, nam deleniti perpetua intellegam an. Ei per officiis detraxit probatus, vim at graecis tincidunt.